Like us on Facebook

Miller Showroom

Innovation in Heavy-Duty Integrated
Towing and Recovery Equipment


For the right mix of power, performance and value, Vulcan's V-70 is the intelligent choice for heavy duty integrated towing and recovery equipment.  Vital components are fabricated from high yield steel to minimize weight to allow for more legal payload while maximizing strength and durability.  The hydraulic components are engineered at the heart of the unit to provide the power to the winches, boom and underlift to handle the most demanding jobs.  The patented double action tilt system is just one of the features that exemplifies Vulcan's superior design with the ability to tilt a full 16,000 lbs. under load.  At Vulcan, we believe that your equipment  is only as good as its weakest component, so we take a total design approach to assure your  V-70 is the most intelligent choice you can make for years of trouble free service.


Dual Control Stations with Direct
     Link Activated Levers
Pressure Gauges
Hour Meter Hydraulic Pump
Independent Hydraulic Rear Spades Pavement Pads (n/a with Flipper Feet)
Tailboard D-Rings Safety Chain in Rear Pockets
Tailboard Fork & Chain Storage Tailboard Recovery Anchors
Air & Electric Hook Up  


Power Elevation Power Extension
360° Sheave Head Cable Tie Backs
Spherical Bearings in Main Boom Dual 2-Speed Planetary Winches
Cable Tensioners Winch Air Free Spool


Patented Power Tilt Hydraulic Fold
3-Stage Design 12 FXN Wireless Remote Control with
      Charging/Docking Station
Low Profile 70° Pivoting Heavy Duty
     Fabricated Cross Bar
Low Profile Fork Holders
9 Sets of Cast Steel Forks:  • Short Axle Fork 
• 3” Short   • 3” Medium   •3” Tall    
• 4.5” Short   • 4.5” Medium   • 4.5” Tall
• 6” Short Offset   • Round Axle Fork
Pivoting Spring Lift Adaptors
Chain Hook End Caps King Pin Tow Plate


Aluminum Modular Body
      w/Rubber Mounting Isolators
LED Body Lighting
LED Tool Compartment Lighting Gas Door Shocks
Chrome Double Action Latches
      w/Remote Lock/Unlock
Adjustable Shelves
Lift Fork Storage Chain Storage
Aluminum Tread-Plate Walkway Mud Flaps


Air Shift PTO Additional Lighting
Poly-Bilt Body Side Work Lights
MVEC Power Distribution Chain Package
Light Pylon SP20,000 SidePuller
Euro Stinger - 144" Endless Loop Sling Package
Multi-Positional Flipper Feet Screw Pin Shackle Kit
Rear Outrigger - Horizontal Spreader Bars
Heavy Duty Tire Lift Tailboard Underlift Controls
Tire Lift Storage Brackets 3 or 4 Drawer Toolbox
Fork Risers Snatch Blocks
Pintle Hook Attachment Wide Load Light Bar
5th Wheel Plate
      (requires pintle hook attachment)
Dual Rear Camera & Monitor
King Pin Attachment
     (requires pintle hook attachment)
Convenience Groups
Trailer Ball Adapter
      (requires pintle hook attachment)
Aluminum Dress-Up Kits
Additional Lift Forks Installation
Underlift Light Kit (LED)  


Boom Structural Rating (S.A.E.)
      Retracted:  30°
70,000 lbs.
     Extended:  30° 28,000 lbs.
Maximum Angle 35°
Maximum Hook Height (inches) 233"
Hydraulic Boom Extension 120"


V-70 (Standard)  
Capacity Fully Extended to C.L. of Forks 16,000 lbs. @ 116"
Capacity Fully Retracted to C.L. of Forks 35,000 lbs. @ 60"
Underlift Tilt 18°
Tow Rating 80,000 lbs
V-70  w/EuroLift  (Optional)  
Capacity Fully Extended to C.L. of Forks 16,000 lbs. @ 144"
Capacity Fully Retracted to C.L. of Forks 35,000 lbs. @ 67"
Underlift Tilt 18°
Tow Rating 80,000 lbs


Winch Capacity 35,000 lbs.
Winch Type Dual Planetary Winch
Cable Specifications 3/4" x 200' I.W.R.C.
Vulcan - V-70


V-70 - Tandem Axle  
      Common Body Configuration 160" C.B.
      Additional Body Configurations 180" / 200" / 220" C.B.
V-70 - Tri Axle  
      Common Body Configuration 180" C.B.
      Additional Body Configurations 200" / 220" C.B.


      Front Axle (lbs.) 13,200
      Rear Axle (lbs.) 40,000
      Clear C.A. or C.B. 156" to 200" C.A.
      After Frame from Center of Rear Axle 36"
      R.B.M. (in./lbs.) 2,250,000

Policies | Privacy | Terms & Conditions | Disclaimer | Site Map